Table of Contents
Advertisement
Configuring and Breaking Mirror
This section describes the procedures to configure and break the mirror of hard disk volumes using
Disk Management.
Configuring Mirror
Follow the procedures below to configure a volume mirror.
IMPORTANT:
Set mirror to the disks whose Target IDs are the pair of 0 and 3, 1 and 4, and 2 and 5. For details,
see "Hard Disk Configurations that can be Built on the NEC " on page 3-2.
1.
Click [Start] - [Administrative Tools] then [Computer Management]. The [Computer
Management] dialog box will appear.
2.
Click [Disk Management] under [Storage] in the console tree.
The [Disk Management] window will appear on the right panel.
3.
Insert a new disk. The disk will appear on the [Disk Management] window.
IMPORTANT:
If the status of the disk is "Not Initialized", right-click the disk and initialize it.
If [Foreign] appears, the disk may have been used on a different server. Right-click
the disk and execute [Import Foreign Disks]. Check the contents of the disk, and save
the field whose contents are necessary .Then right-click the disk and execute
[Convert to Basic Disk...].
Windows Setup and Operation 3-5
Advertisement
Table of Contents
Troubleshooting
