NEC Express5800/320Fa-L User Manual page 165

Table of Contents

To disable the remote management console function, make the following settings from the

NEC EXPRESSBUILDER CD-ROM. Load the NEC EXPRESSBUILDER CD-ROM on

the server, and from the main menu, select [Tools] → [System Management] → [Set FT

Remote Management Card (LAN1/LAN2)]. Select [Disable] on [Remote Management

Console] and register the setting. The host name, the domain name, and the IP address

cannot be modified on this screen.

The image below shows the setting screen for LAN1 (CPU/IO module #0).

If you use remote management for the first time, the "Waning - Security" dialogue box as shown

below may be displayed. Check the message, and then click [Yes] [No], or [Always]. Then you will

see the login page. If you are not sure, click [No].

System Configuration 4-51

Troubleshooting