Table of Contents
Advertisement
Chapter 2 Preparations
4.
Draw the cable into the chassis and mount the front panel bracket on the server chassis in the
reverse order of the removal procedure.
Connecting to a RAID Controller
1.
Connect another connector of the flash backup unit control cable to the RAID controller. Check
the marker of the connector and connect the cable straight into the connector. Be careful not to
press it in at an angle when connecting.
Position of the connector
Connect the cable to the connector shown in the figure below.
50
Tips
For the position of the connector of N8103-206/207/208, refer to the manual
attached to N8103-206/207/208.
Black Marker
Express5800/T110i-S User's Guide
1. Installing Internal Optional Devices
RAID Controller
Advertisement
Table of Contents
