Chapter 2 Setup and Operation Procedures
2.3 Checking the Setting Information
2.3
Checking the Setting Information
This section explains how to check the setting information of the key management function.
2.3.1
Setting Information of the Key Management Function
To check whether the key management function is enabled, follow the procedure below.
Procedure
1
Log in to the remote panel.
2
Move to the [Status > Security] screen.
In [Security Encryption Status], if "Enabled" is displayed for [LT Encryption], the key
management function is enabled.
Figure 2.40 [Status > Security > Security Encryption Status] screen
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
59
Copyright 2019 FUJITSU LIMITED
End of procedure
P3AG-3762-02ENZ0