Bosch Professional GIC 12V-5-27 C Original Instructions Manual page 30

30 | English
Operation with Lithium-Ion Rechargeable Battery (see figure B)
Use only the chargers listed in the technical data. Only these battery chargers are
u
matched to the lithium-ion batteries of your inspection camera.
Note: Lithium-ion rechargeable batteries are supplied partially charged according to in-
ternational transport regulations. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for the first time.
To insert the charged rechargeable battery (14), slide it into the port (21) until you feel
it click into place and it is flush with the handle of the inspection camera.
To remove the battery (14), press the release buttons (23) and pull it out of the
port (21). Do not use force to do this.
Recommendations for Optimal Handling of the Battery
Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to 50 °C. Do not leave the bat-
tery in your car in the summer, for example.
A significantly reduced operating time after charging indicates that the battery has de-
teriorated and must be replaced.
Follow the instructions on correct disposal.
Fitting the camera cable (see figure C)
For operation of the inspection camera, the camera cable (1) must be fitted on the hand-
held device (13).
Push the connector of the camera cable (1) onto the camera connection (25) in the cor-
rect position until it clicks into place.
Removing the camera cable (see figure D)
To remove the camera cable (1), press the locking mechanism (26) and pull the con-
nector out of the handheld device (13).
Fitting the mirror, magnet or hook (see figure E)
The mirror (29), the hook (28) or the magnet (27) can be fitted on the camera head (2)
as accessories.
Push one of the three accessories, as shown in the figure, all the way onto the camera
head (2).
Note: The magnet (27) and the hook (28) are only suitable for moving and removing
loose, small and light objects. The inspection camera or the accessory can be damaged
with too strong a pull.
1 609 92A 89L | (17.03.2023) Bosch Power Tools