Checking The Engine-Oil Level; Checking The Cooling System; Checking The Hydraulic System; Adjusting The Roll Bar - Toro Groundsmaster 7200 Series Operator's Manual

Checking the Engine-Oil
Level
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
Checking the Engine-Oil Level (page
Checking the Cooling
System
Before you start the engine and use the machine,
check the cooling system; refer to
Cooling System (page
Checking the Hydraulic
System
Before you start the engine and use the machine,
check the hydraulic system; refer to
Hydraulic System (page

Adjusting the Roll Bar

WARNING
To avoid injury or death from rollover, keep
the roll bar in the raised locked position and
use the seat belt.
Ensure that the seat is secured with the seat
latch.
WARNING
There is no rollover protection when the roll
bar is in the down position.
• Do not operate the machine on uneven
ground or on a hill side with the roll bar in
the down position.
• Lower the roll bar only when absolutely
necessary.
• Do not wear the seat belt when the roll bar
is in the down position.
• Drive slowly and carefully.
• Raise the roll bar as soon as clearance
permits.
• Check carefully for overhead clearances
(i.e., branches, doorways, electrical wires)
before driving under any objects and do
not contact them.
36).
Checking the
19).
Checking the
50).
Important:
Always use the seat belt when the
roll bar is in the raised and locked position. Do
not use the seat belt when the roll bar is in the
lowered position.
Lowering the Roll Bar
Lower the roll bar as shown in
Note:
Push the bar forward to relieve pressure on
the pins.
Note:
Secure the roll bar so that it does not damage
the hood.
19
Figure 9.
Figure 9
g031636
g031635