Positioning The Seat; Changing The Seat Suspension - Toro Groundsmaster 7200 Series Operator's Manual

position. Start the engine. While the engine is
running, release the parking brake, engage the
PTO, and rise slightly from the seat; the engine
should shut off within 2 seconds.
4. Without an operator on the seat, engage the
parking brake, move the PTO switch to the O
position, and move the motion-control levers to
the N -
EUTRAL LOCK
While the engine is running, center either motion
control; the engine should shut off within 2
seconds. Repeat for the other motion-control
lever.
5. Without an operator on the seat, disengage the
parking brake, move the PTO switch to the O
position, and move the motion-control levers
to the N -
EUTRAL LOCK
engine; the engine should not crank.
Using the SCM to Diagnose
System Problems
The machine is equipped with a standard control
module (SCM) monitoring system that tracks the
function of various key systems. The SCM is located
under the right control panel. Access it through the
side panel cover (Figure
cover, release the 2 latches and pull out on it.
1. Side panel cover
On the face of the SCM are 11 LEDs that illuminate to
indicate various system conditions. You can use 7 of
these lights for system diagnosis. Refer to
for a description of what each light means. For details
on using the rest of the SCM functions, refer to the
Service Manual, available through your Authorized
Toro Distributor.
position. Start the engine.
position. Try starting the
11). To open the side panel
Figure 11
2. Latches
Figure 12
FF
FF
1. High temperature shutdown—the engine temperature has
exceeded safe levels and the engine has been shut down.
Check the cooling system.
2. High temperature warning—the engine temperature is
approaching unsafe levels and the mower deck has been
shut down. Check the cooling system.
3. Operator is in the seat.
4. The PTO is on.
5. The parking brake is not engaged.
6. Controls are in neutral.
7. The SCM is receiving power and is operational.

Positioning the Seat

The seat moves forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
To adjust, move the lever sideways to unlock the seat
(Figure 13).
g004495
Changing the Seat
Suspension
The seat is adjustable to provide a smooth and
comfortable ride. Position the seat where you are
most comfortable.
21
Figure 12
Figure 13
g004927
g008962