The Hotsync ® Operation Does Not Start And The Message Is; Displayed On The Screen; The Error Message For Insufficient Memory Is Displayed When - Sony CLIE PEG-NX70V Frequently Asked Questions Manual

®
The HotSync operation does not start and the message is

displayed on the screen

B Move your CLIÉ handheld away from the computer's infrared port except
when performing an IR HotSync
Or, tap General in the Preferences screen and check that the Beam
Receive function is turned off.
B Your computer's infrared port may be set to search automatically for the
presence of other infrared devices. Do the following to turn off this option:
1 In the Windows task bar, select Start, point to Settings, and select
Control Panel (In case of Windows XP, it is Start - Control
panel ).
2 Double click the Infrared icon. (In case of Windows 2000
Professional/ Windows XP, it is Wireless Link icon.)
3 Click the tab Sending image .
4 Click the check box. Send the image from the digital camera to your
computer using the wireless link to uncheck, and click OK .
5 Click the HotSync
computer and check by clicking Infrared from the displayed menu.
The error message for insufficient memory is displayed
when you receive data via IR port
B For data receiving via beaming, the free space of your CLIÉ handheld
memory must be more than twice the size of data to be received.
When the memory is insufficient, delete any unnecessary data.
B Perform a soft reset by pressing the reset button.
b
For details, refer to "Basic Operations of your Sony CLIÉ™ Handheld:
Resetting your CLIÉ Handheld" in "Read This First (Operating Instructions)."
®
operation, as a malfunction may occur.
icon on the bottom right of the screen of your
27