Continued On Next Page; The Palm™ Desktop For Clié Software Does Not Start Or; Cannot Be Selected From The Menu; The Hotsync Manager Does Not Start - Sony CLIE PEG-NX70V Frequently Asked Questions Manual

The Palm™ Desktop for CLIÉ software does not start or

cannot be selected from the menu

B The Palm™ Desktop for CLIÉ software is not installed properly.
The hardware or the software of your computer may not be compatible
with the Palm™ Desktop for CLIÉ software. Uninstall the Palm™
Desktop for CLIÉ software and install once again.
The HotSync Manager does not start (The HotSync
is not displayed in the bottom right of the computer
screen)
B Install the Palm™ Desktop for CLIÉ software once again.
When you perform a HotSync
software of your computer starts
B A mail software that you do not use regularly or a mail software that is not
installed is selected in Mail setup.
Click the HotSync
computer and select Custom. Select Mail from conduit, click Change,
start Mail setup and specify the mail software that you use regularly.
B The settings of the mail software are not complete.
Set so that you can access mails from your computer.
You cannot perform a HotSync
Verifying your CLIÉ handheld
B Verify that the phone number you are connecting to is correct.
B When you are using the call waiting facility in your service line, tap
Network-Phone in the Preferences screen and in the Phone Setup
screen select the check box of Disable call waiting and enter the correct
number.
®
operation, the mail
icon in the bottom right of the screen of your
®
operation via modem
icon

Continued on next page

• • • • • • • • • • • • • • • • • • • • • • • • •
21