The Backlight Does Not Turn On When You Adjust The Brightness; The Lcd Cannot Be Viewed Properly; Software Or Applications Do Not Operate Properly After A Soft; You Cannot Use The Jog Dial™ Navigator - Sony CLIE PEG-NX70V Frequently Asked Questions Manual

The backlight does not turn on when you adjust the
brightness level
B When you are adjusting the brightness level, the LCD backlight turns on.
When brightness is set to the lowest level, the display may be illegible.
This is not a malfunction.

The LCD cannot be viewed properly

B Depending upon the angle of vision, the brightness may be uneven, but this
is not a malfunction. Adjust the brightness level by tapping the "Brightness
adjustment icon" on the bottom left of the screen. Also, when the backlight
is off, you can turn it on by pressing the POWER button for more than two
seconds.
Software or Applications do not operate properly after a
soft reset is performed
B If you encounter software or application problems (such as improper
operations, unusual display, or freezing during a soft reset), after you
performed a reset, the reset may not be completed properly. Perform a reset
once again.
b
For details, refer to "Basic operations of your Sony CLIÉ™ Handheld: Resetting
your Sony CLIÉ Handheld" in "Read This First (Operating Instructions)."
Note on performing a reset
After performing a reset, do not press the reset button until the
Preferences screen or the Welcome screen is displayed.
You cannot use the Jog Dial™ navigator
B Jog Dial™ navigator is not available for some applications.
15