Epson SureColor SC-F6300 Series User Manual page 86

SC-F6300 Series User's Guide
E
Open the printer cover and place the two
cleaning pads on the platens on either side of the
print head (a).
Placement position
Place in the position shown in the illustration.
c
Important:
Place the cleaning pads so that they do not
cover the ink absorbing areas (b) on the
platens. Otherwise the ink absorbing areas (b)
could stick to the adhesive surface of the
cleaning pads and come off when the cleaning
pads are removed.
Placement method
Place the cleaning pads by applying the edge of
the pads to the roller.
Maintenance
c
Important:
❏ Place the cleaning pads so that there are no
gaps between the pads and the roller.
Cleaning will not be performed correctly if
the pads are not placed properly.
❏ Do not move the print head by hand. This
can cause damage.
F
Rub your finger over the areas indicated in the
illustration to secure the pad in place.
c
Important:
Secure the adhesive parts of the pads so that
there are no parts that have not been stuck
down. Do not press the cleaning pad too hard
at this point. This could deform the platen.
G
Close the printer cover, and then press the Z
button.
Print head maintenance starts.
c
Important:
Do not open the printer cover while cleaning.
Cleaning stops if the cover is opened.
86