Epson SureColor SC-F6300 Series User Manual page 13

SC-F6300 Series User's Guide
* When a chip unit is mounted on the printer,
the information about the available amount
of ink in the ink pack that is registered to the
new chip unit is automatically written to the
printer. Writing the chip unit information
to the printer is called "charging".
When charging is complete, the indicator
levels become full, and the icon for the
charge status turns gray. After charging, if
you remove a chip unit from the printer and
replace it with a new one, charging occurs
automatically when the indicator level rea‐
ches 0.
Installing a new chip unit on the printer to
do automatic charging is called "Reserving".
Reserving can be done at any time if the
indicator's level for the estimated amount of
ink is between 1 and 6.
2 Ink color codes
* : High Density Black
HDK
* : Black
BK
Y : Yellow
M : Magenta
C : Cyan
* Displays the ink color selected at the time of
purchase.
- : The Maintenance Tab
This tab shows the status of the Waste Ink
Bottle and the Maintenance menu.
The Info Display Area
Icons display the approximate amount of
space available in the Waste Ink Bottle and the
status. The icons change as shown below when
the waste ink bottle is nearly full or an error
occurs.
Normal
Introduction
Warning or error
13
1 Status indicators
The status of the Waste Ink Bottle is shown
as follows.
: No error. The indicator changes to
show the amount of space
available.
: Prepare a new Waste Ink Bottle
because there is not enough free
space in the current bottle.
: The amount of space available in
the Waste Ink Bottle has dropped
below the minimum limit. Replace
with a new Waste Ink Bottle.
Press the Z button or the Menu button when
this tab is selected to display the Maintenance
menu.
"Maintenance Menu" on page 53
U
/ : The Setup Tab
This tab shows the IP address and a variety of
other menus.
The Info Display Area
Displays the IP address when one has been set.
Press the Z button or the Menu button when
this tab is selected to display the Setup menu.
"Setup menu" on page 54
U