Starting "Server Setup, Powered By Dixim - Sony DVP-NW50 User Manual

Setup 4: Setting up "Server Setup, powered by DiXiM" (continued)
13
Confirm that the check boxes for the five DiXiM
services you have added are selected, and then click
"OK."
The "Advanced Settings" window closes.
14
Click "OK" in the "Local Area Connection Properties"
window.
"Local Area Connection Properties" window closes.
Depending on your computer, when you activate the
"Internet Connections Firewall" feature, it might take
several seconds for the window to close after you click
"OK."
15
Click "Close" in the "Local Area Connection Status"
window.
The "Local Area Connection Status" window closes.
16
Confirm the "Internet Connection Firewall" feature
is on.
When the "Internet Connection Firewall" feature is on, a
small icon of a lock appears on the right upper part of
the "Local Area Connection" icon in the "Network
Connection" window in the Control Panel. This lock
icon indicates that the network protection of the
"Internet Connection Firewall" feature is active.
The "Internet Connection Firewall" settings are finished.
Starting "Server Setup, powered by
DiXiM"
There are three ways to start "Server Setup, powered by
DiXiM":
• By clicking "Advanced" in the "Setup Menu-PC"
window.
• By right-clicking ("Utility for In-Wall Unit" icon) in
the task tray, and selecting "Advanced setting" from the
shortcut menu.
• By clicking "Start" on the Windows taskbar, and point to
"All programs," – "DigOn,"- "Utility for In-Wall Unit-
Server Setup," then click "Utility for In-Wall Unit-Server
Setup."
Continue to the next page l
Chapter 1
Local Area Connection
Connected, Firewalled
Intel(R) PRO/100 VE Network ...
21
Getting Started