Setting Up Each Unit Individually - Sony DVP-NW50 User Manual

Setup 3: Setting up the Utility for In-Wall Unit software (continued)

Setting up each Unit individually

You can configure settings such as clock, volume, privacy,
and intercom for each Unit individually.
1
Double-click ("Utility for In-Wall Unit" icon) in the
task tray.
The main window appears.
You can also click "Start" on the Windows taskbar, then
point to "All Programs"—"Utility for In-Wall Unit," then
click "Utility for In-Wall Unit."
2
Click to select any Units.
3
Click to select the item you want to adjust or set
up.
For details on each item, see the next page.
4
Click "OK" or "Apply."
The setting takes effective.
When you click "OK" or "Cancel," the Music Menu
Window appears.
To save the setting data
1 Click "Save."
2 Click to select the folder in which the setting data is
to be saved.
3 Click "OK."
To load the setting data
1 Click "Load."
2 Click to select the folder that contains the setting
file.
3 Select the setting file you want to load.
4 Click "OK."
Continue to the next page l
Chapter 1
11
Getting Started