Table of Contents
Advertisement
WARNING ‒ Risk of burns!
The cooking compartment gets very hot when the
cleaning function is in progress.
Never open the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
The outside of the appliance gets very hot when the
cleaning function is in progress.
Never touch the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
Note: The oven light does not light up while the clean-
ing function is running.
Requirement: → "Preparing the appliance for the
cleaning function", Page 28.
Press "Cleaning" in the menu.
1.
Press
"Pyrolytic activeClean".
2.
Press "Level" and use the setting ring to set the
3.
cleaning setting.
Cleaning set-
Cleaning
ting
level
1
Low
2
High
The duration cannot be changed.
You can delay the time at which the operation
should be ready.
→ "Setting the end time", Page 15
To confirm the set cleaning setting, press
4.
display.
Press
.
5.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning func-
tion appears on the display.
21 Cleaning aid
The cleaning aid
is a quick alternative for occasion-
ally cleaning the cooking compartment. The cleaning
aid softens dirt by evaporating the soapy water. It is
then easier to remove the dirt.
21.1 Setting the cleaning aid
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
Never pour water into the cooking compartment
▶
when the cooking compartment is hot.
Note: The oven light does not come on while the clean-
ing aid is running.
Requirement: The cooking compartment must have
cooled down completely.
Remove any accessories from the cooking compart-
1.
ment.
Duration in hours
Approx. 2:15
Approx. 2:30
on the
Confirm the message.
6.
a The cleaning function starts and the duration counts
down.
a For your safety, the appliance door locks once a
certain temperature is reached in the cooking com-
partment. appears on the display.
a A signal tone sounds when the cleaning function
has finished. A message appears on the display
confirming that the operation has finished.
Press
to switch the appliance off.
7.
→ "Preparing the appliance after the cleaning func-
8.
tion", Page 29.
Cancelling the cleaning function
You can no longer stop or change the cleaning func-
tion once it has started.
To cancel the cleaning function, press
▶
the appliance off.
20.3 Preparing the appliance after the
cleaning function
Allow the appliance to cool down.
1.
Wipe off any ash that has been left behind in the
2.
cooking compartment, on the shelf supports and
around the appliance door with a damp cloth.
Remove white residues with lemon juice.
3.
Note: White residues on the enamel surfaces may
be caused by heavy soiling. These food residues
are harmless. The deposits do not compromise the
functionality of the appliance.
Note: While the cleaning function is running, the frame
on the inside of the appliance door or other parts of
the door that are made of stainless steel become dis-
coloured. This discolouration does not compromise the
functionality of the appliance. The discolouration can
be removed using a stainless steel cleaner.
2.
ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
Do not use distilled water.
▶
Mix 0.4 litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
Press "Cleaning" in the menu.
3.
4.
Press
"Cleaning aid".
The duration cannot be changed.
Press
.
5.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning aid ap-
pears on the display.
Confirm the message.
6.
a The cleaning aid starts and the duration counts
down.
a Once the cleaning aid has ended, a signal tone
sounds. A message appears on the display confirm-
ing that the operation has finished.
Press
to switch the appliance off.
7.
→ "Cleaning the cooking compartment after using
8.
the cleaning aid", Page 30.
Cleaning aid en
to switch
29
Advertisement
Table of Contents
