Toshiba LF620F Instruction Manual page 49

Switch operation
N O
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Display example
R1
Push
to check or change.
10.0000
The screen changes and the currently set
item appears for you to check.
m/s
Pushing
screen.
ESC
R1
When you push
on the setting value and the screen is ready
10.0000
to change the setting value.
m/s
R1
Ready to change the setting value
10.0000
Pushing
the place where the cursor is positioned.
m/s
(Holding down the switch longer causes the
operation to continue.)
* Pushing
below the digit of unit will change the unit to the
next unit. In addition, if a natural number is used, a
decimal point as well as the numeric value appears.
R1
Ready to change the setting value
10.0000
Pushing
next digit.
m/s
R1
Ready to change the setting value
05.0000
Change the setting value using
m/s
In this example, 5.000 m/s is set.
R1
Pushing
The cursor disappears and a message
05.0000
appears to confirm whether it is OK or not.
m/s
SET OK?
ESC N O
O K
R1
If you want to cancel the operation, for
example, because the temporarily set data is
10.0000
incorrect,
temporarily set data to the previous value,
m/s
enabling you to change the setting value
again.
Pushing
and exits the setting screen.
－ 48 －
6 F 8 A 0 9 2 8
Description
to select the item you want
ESC
returns you to the menu
, the cursor appears
increments the number in
when the cursor is positioned
moves the cursor to the
.
sets the data temporarily.
pushing returns
N O
ESC cancels the setting operation
and
the