Table of Contents
Advertisement
Help Guide
Mobile Motion Capture
QM-SS1
Precautions
Notes on motion capture
The AI-based estimation technology is used for the motion capture function of the device. Accuracy of estimation may
vary by the usage condition or user's physical constitution.
Perform the motion capture in a wide place, taking care not to hit people or objects. Be careful not to hurt your body.
Stop using the device if you feel something unusual. Otherwise, it may result in bodily injury, accident, or malfunction.
The body height that the device can recognize body movement correctly is between 140 cm (4 feet and 8 inches)
and 190 cm (6 feet and 2 inches).
The motion capture function may not work correctly depending on the communication environment for connecting the
device to a smartphone or other surrounding conditions.
Note on attaching the devices
Be careful not to pinch your finger with the clip. It may cause bodily injury.
Other notes
Do not allow medicament such as insect repellent spray, sunscreen, or body cream to adhere to the device. This may
deform or discolor the device. When such medicament is adhered, wipe it off.
Do not splash water on the charging case. The charging case is not waterproof. Avoid using in a humid place such as
in a bathroom, or exposing to rain drops. Note that malfunctions caused by water is out of warranty and repair may
be refused. If the repair is available, it is acceptable for a fee because it is out of the warranty.
Do not leave the sensors, clip, sockets on the straps, or charging case in places where they are exposed to high
temperatures and keep them away from objects that reach high temperatures.
Do not charge or use the devices in places with the following properties.
Extremely high or low temperature, or high humidity
Damp, dusty, or with excessive vibration
Charging may stop to protect the battery or take more time in an area with high or low temperature. Avoid areas with
high or low temperatures to restore the normal charging.
Cleaning the device
If the surface is dirty, wipe it clean with a soft dry cloth. If you wipe it using detergent, etc., this can cause
discoloration on the surface of the device units. Do not use solvents such as thinner, benzene, or alcohol, as they
may damage the finish on the surface of the device units or cause other damages. For details, see the "Maintenance"
section.
Do not use the sensors, clip, sockets on the straps, and charging case near medical devices
Radio waves can affect cardiac pacemakers and medical devices. Do not use the device units and charging case in
crowded places or inside a medical institution.
The sensors, clip, sockets on the straps, and charging case have magnets which may interfere with pacemakers,
programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place the sensors close to
persons who use such medical devices. Consult your doctor before using the sensors if you use any such medical
device.
Keep the sensors, clip, sockets on the straps, and charging case away from magnetic cards
The sensors, clip, sockets on the straps, and charging case contain magnets. If you bring magnetic cards close to
them, the magnetism may change, and the cards may become unavailable.
34
Advertisement
Table of Contents
