Sony QM-SS1 Help Manual page 18

Help Guide
Mobile Motion Capture
QM-SS1
Attaching the sensors to your body
Following the instructions on the [Attaching the sensors] screen, attach the sensors.
1
When you are finished attaching the sensors, tap [CONFIRM].
2
The [Calibration] screen appears.
Note
Tighten the straps so that they do not come loose.
Wear the wrist straps (for the wrists) directly against your skin. Avoid wearing the straps over clothing.
Wear the ankle straps (for the ankles) directly against your skin or above your socks. Avoid wearing the straps over clothing.
Firmly insert the clip (for the hip) into the top of your pants or belt and make sure the clip is secure. Attaching the sensor to your
shirt or outerwear may cause the clip to come loose or fall off during intense movement.
If the sensor falls off during use, your movements may not be recognized correctly. If a sensor sustains an impact after falling off,
etc. after it is connected to the app, reconnect it.
Related Topic
Performing calibration
Device unit parts
H-242-100-11(1) Copyright 2023 Sony Corporation
18
TP1001055240