Setting Up An External Device - Sony QM-SS1 Help Manual

Help Guide
Mobile Motion Capture
QM-SS1

Setting up an external device

Set the IP address, outbound port number and transfer format for the external device to receive data.
Tap the menu icon on the motion capture screen.
1
The menu appears.
Tap [Settings].
2
The [Settings] screen appears.
Tap [PC connection settings].
3
The [PC connection settings] screen appears.
Set the [IP address] and [Outbound port settings], and select the [Transfer format] for the external device to
4
receive data.
Tap [OK].
5
Allows data to be sent from the mocopi app to the external device.
Hint
To send motion data to VRChat, select [VRChat (OSC)]. The default port number for VRChat is 9000.
Note
The motion capture data transmission function is designed to be used on a local network, and therefore, the data is not
encrypted. If the data is transmitted via the internet, the communications data may be intercepted and leaked.
Related Topic
Overview of the motion capture screen
Sending motion data to an external device
Recording in Motion mode
H-242-100-11(1) Copyright 2023 Sony Corporation
29
TP1001055231