Toshiba GN-1040 Operator's Manual page 27

8.
SUPPLEMENT: If you want to change the settings, press the [PREV] button to move back to the screen
that you want to change and then repeat the operation.
9.
Selecting WPAPSK security mode
The WPAPSK is an authentication method using the PSK (Pre-Shared Key) between
the Access Point and other wireless devices.
To access the wireless network using the WPAPSK authentication, the same PSK Path
Phrase must be assigned in both the Access Point and other wireless devices. If the
PSKs are same between the Access Point and other wireless devices, the Access Point
allows them to access the wireless network through the Access Point.
1.
GN-1040 Operator's Manual — Setting Up the Infrastructure Mode
Confirm the settings and press the [FINISH] button.
• The shut down screen is displayed.
Press the [YES] button to shut down the equipment.
• The wireless settings apply after restarting the equipment.
Press the [WPAPSK] button and press the [NEXT] button.
• The WIRELESS ENCRYPTION WPA-PSK screen is displayed.
1. Setting Up Wireless Network
27