Table of Contents
Advertisement
6.
SUPPLEMENT:
When pressing the [USER CERTIFICATE] or [PASSWORD] button, the letter entry
screen is displayed. Enter the value using the keyboard and digital keys, and press the
[ENTER] button to set the entry.
7.
SUPPLEMENT:
When pressing the [CA CERTIFICATE], the letter entry screen is displayed. Enter the
value using the keyboard and digital keys, and press the [ENTER] button to set the
entry.
GN-1040 Operator's Manual — Setting Up the Infrastructure Mode
Specify the following items and press the [NEXT] button.
[USER CERTIFICATE]
Press this to enter the file name of the user certification file that you install in the
equipment using TopAccess. If the specified certification file is not installed in
the equipment, the error message to input correct file name will be displayed.
[PASSWORD]
Press this to enter the password for the user certification file.
Specify the following items and press the [NEXT] button.
ENCODING FORMAT
Select the encoding format of the CA certification file.
[CA CERTIFICATE]
Press this to enter the file name of the CA certification file that you install in the
equipment using TopAccess. If the specified certification file is not installed in
the equipment, the error message to input correct file name will be displayed.
1. Setting Up Wireless Network
21
Advertisement
Table of Contents
