Advertisement
8
Attach the short brackets (or
long brackets if the monitor is
joined to a monitor control
unit) to the monitor using two
screws B (4 × 12 mm) for each
bracket.
For a monitor joined to a
monitor control unit
Select the front or rear screw
holes of the long brackets.
• To mount the monitor so that
it fits exactly inside the rack,
use the screw holes at the rear
of the long brackets (see Fig.
A). In this case, the monitor
control unit is recessed
slightly from the front of the
rack.
• To mount the monitor so that
it protrudes slightly from the
rack, use the screw holes at
the front of the long brackets
(see Fig. B). In this case, the
monitor control unit is even
with the front of the rack.
Screws B
Short brackets
Monitor joined to a monitor control unit (side view)
Use the front
holes.
Use the rear
holes.
Fig. A
Screws B
Long brackets
Screws B
Fig. B
Screws B
(continued)
5(E)
Advertisement
