Advertisement
Overview
The BKM-30E20 Rack Mount Kit is a rack mount kit
for mounting a Sony BVM series 20-inch monitor in
an EIA standard 19-inch rack.
Note
When a BVM-series 20-inch monitor is mounted in a
van using the BKM-30E20, you should take
precautions to prevent the monitor from falling out of
the rack because of impacts or vibration. Do so by
securing the monitor to the rack with rope or with
brackets adjusted for the rack.
Components
The BKM-30E20 consists of the following
components. Check to make sure that you have all the
components before beginning assembly.
Slide rails (2)
Part No. 4-051-399-01
Front brackets (left, right, one each)
Part No. X-4033-179-1 (Left)
Part No. X-4033-178-1 (Right)
Left
Top
Bottom
Rear brackets (2)
Part No. 4-051-261-01
2(E)
Right
Long
Judge, from the
position of the screw
holes (as shown in
the left figure),
which side is the
top.
Short
Short brackets
(left, right, one each)
Part No. X-4033-182-1 (Left)
Part No. X-4033-183-1 (Right)
Long brackets
(left, right, one each)
Part No. X-4033-181-1 (Left)
Part No. X-4033-180-1 (Right)
Screws A (4 × 10 mm, silver) (16)
Part No. 7-682-562-04
Screws B (4 × 12 mm, black) (4)
Part No. 2-650-423-01
Screws C (4 × 16 mm, silver) (8)
Part No. 7-682-565-04
Nuts (8)
Part No. 7-684-024-04
Plate nuts (4)
Part No. 4-051-259-01
Judge, from the position
of the screw holes (as
shown in the figure),
which side is the top.
Plain washers (φ4) (16)
Part No. 7-688-004-01
Spring washers (φ4) (12)
Part No. 7-623-210-22
Top
Bottom
Right
Left
Top
Bottom
Right
Left
Long
Top
Short
Bottom
Advertisement
