Panasonic WH-ADC0509L3E5 Installation Manual page 22

Operation setup
Service setup
Remote control setup
22
22
DHW defrost
23
Heating control
24
External meter
25
Electrical anode
26
Heat Water temp. for heating ON
27
Outdoor temp. for heating OFF
28
29
 Cooling model only
30
Cool Water temp. for cooling ON
31
 Cooling model only
32
Auto
33
 Only when the
selection for Tank is
Yes (except for AIO) 34
Tank Floor operation time (max.)
35
Tank heat up time (max.)
36
37
38
Pump maximum speed
39
Dry concrete
40
Service contact
41
RC selection
Yes/No
Comfort/Effi ciency
Heat-cool meter / *Tank meter /
Elec. meter HP / Elec. meter 1 (PV meter) /
Elec. meter 2 (Total building) / Elec. meter 3 (Reserve)
*Only available when Heat-cool meter select Yes
Yes/No
T for heating ON
Heater ON/OFF
(Display only if Cool exist, or else skip)
T for cooling ON
Outdoor temp. for
(Heat to Cool)
Outdoor temp. for
(Cool to Heat)
Tank re-heat temp.
Sterilization
Pump maximum speed setup
ON (Dry concrete)
Edit (Dry concrete schedule)
Contact 1
Contact 2
Single / Dual
Compensation curve
Direct
Heating OFF Temp. setup
T for heating setup
O/D temp for heater ON setup
Heater ON Delay Time
T of target temperature for Heater ON
T of target temperature for Heater OFF
Compensation curve
Direct
T for cooling setup
Heat Cool change temp. setup
Cool Heat change temp. setup
Max. operation time for Heat & Cool mode setup
Max. operation time for Tank mode setup
Tank re-heat temp. setup
Sterilization day and temp. and time setup
Air purge
Day and temp. setup
Name and Tel No. setup
Name and Tel No. setup
Compensation
curve setup
Direct temp. setup
Compensation
curve setup
Direct temp. setup