22/52
Transport and storage
Transport with lifting strap
Bosch Rexroth AG, A2FM/A2FE Series 70, RE 91071-01-B/03.2015
You can hoist the axial piston unit as shown in Fig. 4 with the eye bolt screwed into
the drive shaft.
Fig. 4: Fixing the eye bolt
wARnInG! Danger from suspended loads!
During transport with a lifting device, the axial piston unit can slip out of the lifting
strap and result in injury.
▶
Use the widest possible lifting strap.
▶
Make sure that the axial piston unit is securely fixed with the lifting strap.
▶
Only guide the axial piston unit by hand for fine positioning and to avoid oscillations.
▶
Never stand or put your hands under a suspended load.
▶
Place the lifting strap around the axial piston unit in such a way that it does not
pass over attachments (e.g., valves, piping) and that the axial piston unit is not
suspended from attachments (see Fig. 5).
Fig. 5: Transport with lifting strap