Bosch Professional GWS 710 Original Instructions Manual page 9

a power failure or when the mains plug is pulled. This
prevents uncontrolled restarting.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials without the use of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
Technical Data
Angle grinder
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding
spindle
Speed preselection
Kickback stop
Restart protection
Starting current limitation
Weight according to EPTA-Procedure 01:2014
Bosch Power Tools
GWS 710
3 601 C94 0..
W 750
W 380
rpm 11,000
rpm –
mm 125
M14
mm 22
–
–
–
–
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Spindle lock button
(2) On/off switch
(3) Speed preselection thumbwheel (GWS 750-100
S/GWS 750-115 S/GWS 750-125 S)
(4) Auxiliary handle (insulated gripping surface)
(5) Combination wrench for grinding spindle M14
(6) Combination wrench for grinding spindle M10
(7) Grinding spindle
(8) Protective guard for grinding
(9) Locking screw for protective guard
(10) Mounting flange with O‑ring
A)
(11) Grinding disc
(12) Clamping nut
(13) Quick-clamping nut
(14) Carbide grinding head
(15) Protective guard for cutting
A)
(16) Cutting disc
A)
(17) Hand guard
(18) Rubber sanding pad
A)
(19) Abrasive disc
A)
(20) Round nut
A)
(21) Cup brush
(22) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 750-100 GWS 750-115
3 601 C94 0.. 3 601 C94 0..
750
380
11,000
–
100
M10
22
–
–
–
–
English | 9
A)
A)
A)
A)
A)
A)
GWS 750-125
3 601 C94 0..
750 750
380 380
11,000 11,000
–
115 125
M14 M14
22
–
–
–
–
1 609 92A 4PH | (06.11.2018)
–
22
–
–
–
–