Bosch Professional GWS 710 Original Instructions Manual page 10

10 | English
Angle grinder
– with additional low-vibra-
tion auxiliary handle
– with standard auxiliary
handle
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Angle grinder
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding
spindle
Speed preselection
Kickback stop
Restart protection
Starting current limitation
Weight according to EPTA-Procedure 01:2014
– with additional low-vibra-
tion auxiliary handle
– with standard auxiliary
handle
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Fitting
Fitting protective equipment
Pull the plug out of the socket before carrying out any
u
work on the power tool.
Note: If the grinding disc breaks during operation or the
holding fixtures on the protective guard/power tool become
damaged, the power tool must be sent to the after-sales ser-
vice immediately; see the "After-sales service and advice on
using products" section for addresses.
Protective guard for grinding
Place the protective guard (8) on the spindle collar. Adjust
the position of the protective guard (8) to meet the require-
ments of the operation. Lock the protective guard (8) by
tightening the locking screw (9) using the combination
wrench (5)/(6).
Adjust the protective guard (8) such that sparking in
u
the direction of the operator is prevented.
Note: The coding cams on the protective guard (8) ensure
that only a protective guard that is suitable for the power
tool can be fitted.
1 609 92A 4PH | (06.11.2018)
GWS 710
kg 1.9
kg 1.8
/ II
GWS 750-100 S
3 601 C94 1..
W 750
W 380
rpm 11,000
rpm 2800–11,000
mm 100
M10
mm 22
●
–
●
●
kg 1.9
kg 1.8
/ II
GWS 750-100 GWS 750-115
1.9
1.8
/ II
GWS 750-115 S GWS 750-125 S
3 601 C94 1.. 3 601 C94 1..
750
380
11,000
2800–11,000 2800–11,000
115
M14
22
●
–
●
●
1.9
1.8
/ II
Protective guard for cutting
Always use the protective guard for cutting (15) when
u
cutting bonded abrasives.
Provide sufficient dust extraction when cutting stone.
u
The protective guard for cutting (15) is fitted in the same
way as the protective guard for grinding (8).
Side handle
Do not operate your power tool without the side
u
handle (4).
Screw the side handle (4) on the left or right of the machine
head depending on how your are working.
Hand guard
Always fit the hand guard (17) when working with the
u
rubber sanding pad (18) or with the cup brush/disc
brush/flap disc.
Attach the hand guard (17) to the side handle (4).
Fitting the abrasive tools
Pull the plug out of the socket before carrying out any
u
work on the power tool.
GWS 750-125
1.9 1.9
1.8 1.8
/ II / II
GWS 750-100 I
3 601 C94 2..
750 750
380 410
11,000 11,000
125 100
M14 M10
22 22
●
–
●
●
1.9 1.9
1.8 1.8
/ II / II
Bosch Power Tools
–
–
●
●
●