Remote; Remote Update - Miele PDW 909 GB Operating And Installation Instructions

Remote

Remote update

- Off
The date and time are not synchronised over the network.
- As master
The machines are in a network but are not connected to the Inter-
net. A machine is declared as the master and sends data to the
slave devices.
- As slave
The machines are in a network and are connected to the Internet.
All machines are configured as slaves. Data is synchronised over
the Internet.
External programme selection is possible via an external terminal
(programme may only be started on the machine). However, pro-
grammes may also be selected and started on the machine.
Factory default: on
The RemoteUpdate function is used for updating the software in your
tumble dryer.
RemoteUpdate is activated by default.
If you do not install a RemoteUpdate, you can continue to use your
tumble dryer in the usual way. However, Miele recommends installing
RemoteUpdates.
Miele's RemoteUpdate function can only be used if the tumble dryer
is connected to a WiFi/LAN network and you have an account in the
Miele Professional app. The tumble dryer must be registered in the
app.
See the Miele Professional app for terms of use.
If a RemoteUpdate is available for your washing machine, it will be
displayed automatically when the Operator level is open.
You can choose to start the RemoteUpdate immediately or wait until
later. If you select "Start later", the prompt to run the RemoteUpdate
will be displayed again the next time you switch on your washing ma-
chine.
The RemoteUpdate can take a few minutes.
Please note the following information about the RemoteUpdate func-
tion:
- You will only receive a message when a RemoteUpdate is available.
- Once a RemoteUpdate has been installed, it cannot be undone.
- Do not switch off the tumble dryer during a RemoteUpdate. Other-
wise, the RemoteUpdate will be aborted and will not be installed.
Tumble dryer supervisor level
127