Miele PDW 909 GB Operating And Installation Instructions page 68

Commercial washer-dryer stack
Table of Contents

Advertisement

Problem solving guide
Unscrew the drain filter to let the water out.
Tighten the drain filter back up again if you need to interrupt the flow of water.
If no water flows out, unscrew the drain filter completely.
Clean the drain filter thoroughly.
Remove any foreign objects (e.g. buttons, coins, etc.) and clean the interior. Turn the im-
pellers by hand to check that they rotate freely.
Put the drain filter back in place and screw it tight.
 Make sure the drain filter is reinserted and securely tightened. Otherwise there is a
risk of water leakage during use.
68

Advertisement

Table of Contents
loading

Table of Contents