Diagnostics And Upkeep; Diagnostics; Diagnostics Options; Snmp - Siemens SIMATIC NET S7-1500 Operating Instructions Manual

Diagnostics and upkeep

5.1

Diagnostics

5.1.1

Diagnostics options

Diagnostics options
You have the following diagnostics options available for the module:
• The LEDs of the module
For information on the LED displays, refer to the section LEDs (Page 23).
• STEP 7: The "Diagnostics" tab in the Inspector window
Here, you can obtain the following information on the selected module:
– Information on the online status of the module
• STEP 7: Diagnostics functions in the "Online > Online and diagnostics" menu
Here, you can obtain static information on the selected module:
– General information on the module
– Diagnostics status
– Information on the PROFINET interface
You will find further information on the diagnostics functions of STEP 7 in the STEP 7
online help.
• Web diagnostics
With the aid of Web diagnostics of the CPU, you read the diagnostics data from an S7
station via the Web browser on the PG/PC.
• Display of the CPU
Using the CPU display, read out diagnostics data from an S7 station on the PG/PC.
You can only use diagnostics via the CPU display if the S7 station is suitably configured.
5.1.2

SNMP

SNMP (Simple Network Management Protocol)
SNMP is a protocol for diagnostics and managing networks and nodes in the network. To
transmit data, SNMP uses the connectionless UDP protocol.
SIMATIC CM 1542-1
Operating Instructions, 04/2023, C79000-G8976-C355-05
5
47