Replacing A Fan - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual
Step 6 Remove the chilled water valve actuator and install a new one.
1.
2.
3.
Step 7 Reinstall the air filter on the right.
Step 8 Power on the unit, tap Start on the home screen, choose Maintenance > Startup
Wizard, and commission the water valve actuator to check that it works properly
before you exit.
Step 9 On the home screen, choose Maintenance > Performance Maintenance to enter
the Performance Maintenance screen and clear the runtime of the chilled water
valve.
----End

10.7 Replacing a Fan

Prerequisites
●
●
Context
Recommended tools: protective gloves, Phillips screwdriver, diagonal pliers, cable
tie
Issue 05 (2022-12-15)
Figure 10-7 Removing the chilled water valve actuator
Remove the water valve actuator handle.
Align the hole in the water valve actuator body with the hole in the water
valve actuator mounting kit, attach the connecting plate to the screw on the
left, secure the water valve actuator using the handle, and reinstall the
handle.
Install cables and secure them using cable ties.
A fan needs to be replaced.
A spare fan of the same model is available and functional.
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Parts Replacement
126