Menu - Mitsubishi Electric MELSEC iQ-F Series User Manual

Menu

This is the menu configuration of Certificate Configuration Tool for FX5-ENET.
Item
Project
Connection Settings
Help
Project
Displays submenu items related to project files.
Item
New
Open
Close
Save
Save As
Exit
Connection Settings
Configure connection settings for communicating with a module.
[Connection Settings]
Item
Host (IP Address)
Enable Password
Password
Show Password
[Communication Test] button
[OK] button
[Cancel] button
Help
Displays the help and version information for Certificate Configuration Tool for FX5-ENET.
Item
Help
About
8 APPLICABLE ENGINEERING TOOL
86
8.1 Certificate Configuration Tool for FX5-ENET
Description
Displays submenu items related to project files.
Configure connection settings for communicating with a module.
Displays the help and version information for Certificate Configuration Tool for FX5-ENET.
Description
Creates a new project.
Opens an existing project.
Closes the current project.
Saves the current project.
Saves the current project as a new project file.
Closes the current project and exits the Certificate Configuration Tool for FX5-ENET.
Description
Specify the IP address set on a module to be connected (the IP address set with GX Works3 on the Ethernet
module).
Select this checkbox to allow a password to be entered.
When "Connection enable" is selected in [Application Settings]  [Security]  [Certificate Configuration Tool] 
[Connection Control Setting] of GX Works3, password input is not required. Therefore, this checkbox can be left
unselected.
Set a password to be used for connection with 6 to 31 characters.
Specify whether to display the password as obscured text or normal text.
Tests whether a module can be connected and communications can be started with the current settings.
Confirms the setting changes and closes the window.
Discards the setting changes and closes the window.
Description
Opens the help of Certificate Configuration Tool for FX5-ENET.
Displays the version and license information for Certificate Configuration Tool for FX5-ENET. ( Page 92
Checking the software version)
Reference
Page 86
Page 86
Page 86