Product Information; Information About Your Product On The Internet; Scope Of Delivery; Declaration Of Conformity - Bosch Condens 8300i W Installation And Maintenance Instructions Manual

HHandover to the user
When handing over, instruct the user how to operate the heating system
and inform the user about its operating conditions.
▶ Explain how to operate the heating system and draw the user's
attention to any safety relevant action.
▶ In particular, point out the following:
– Alterations and repairs must only be carried out by an approved
contractor.
– Safe and environmentally compatible operation requires
inspection at least once a year and responsive cleaning and
maintenance.
– The heat generator may only be operated with the casing fitted
and closed.
▶ Point out the possible consequences (personal injury, including
danger to life or material damage) of non-existent or improper
inspection, cleaning and maintenance.
▶ Point out the dangers of carbon monoxide (CO) and recommend the
use of CO detectors.
▶ Leave the installation instructions and the operating instructions with
the user for safekeeping.
HWarning statements
▶ Do not spray aerosols in the vicinity of this appliance while it is in
opreration.
▶ Do not use or store flammable materials in or near this appliance.
▶ Do not place articles on or against this appliance.
▶ Do not modify this appliance.
Condens 8300i W – 6721841531 (2022/10)
2

Product Information

2.1

Information about your product on the Internet

We want to actively provide you with suitable information about your
product relevant to your situation. We therefore recommend you use the
information provided on our web pages. You can find the Internet
address on the back of these instructions.
2.2

Scope of delivery

10
9
8
7
Fig. 1 Scope of delivery
[1] Wall mounted gas condensing boiler
[2] Mounting bracket
[3] Connector pipes
[4] Gaskets
[5] Mounting Plate
[6] Fixing materials (screws with accessories)
[7] Set of printed documents for product documentation
[8] Hose for condensate pipe
[9] Compression fittings for connector pipes
[10] Gasket for flue accessory
2.3

Declaration of conformity

The design and operating characteristics of this product comply with the
European and national requirements.
The CE marking declares that the product complies with all the
applicable EU legislation, which is stipulated by attaching this
marking.
The complete text of the Declaration of Conformity is available on the
Internet: www.bosch-climate.com.au/
www.bosch-climate.co.nz.
Product Information
1
3
4
5
0010041046-004
2
6
5