Product Description; Canopy Subscriber Module - Motorola Canopy Subscriber Module User Manual

PRODUCT DESCRIPTION

Canopy Subscriber Module

The base cover of your Canopy Subscriber Module is easily removed by depressing the release
lever on the back of the cover.
Remove the base cover as shown in FIGURE 1 to access the Ethernet connection and the
Connection LED alignment indicators.
♦
The RJ45 connector is used to attach the Ethernet cable.
♦ The LED's indicate system status and are used for alignment.
Base Cover
Base Cover
Release
Ethernet
Lever
Cable
FIGURE 1
RJ45
Connector
Base Cover
Ethernet
Cable
FIGURE 2
Page 5
Canopy SM
Connection
LEDs