Canon DP-V2730 Operation Manual page 38

OSD Menu
Sub Menu
Format
38
Audio Input
Switch Out
Select Output Signal
Output Signal Marker
SDI Signal Sets the color format and gradation.
Automatic
4:2:2 YCbCr 10-bit [Automatic]: Sets automatically to match the input signal.
4:2:2 YCbCr 12-bit
• The HD-SDI signal is either [4:2:2 YCbCr 10-bit] or [4:2:2 ICtCp 10-bit].
4:4:4 YCbCr 10-bit
• If [Automatic] is selected, they are rendered in a Payload that is selected in the
4:4:4 YCbCr 12-bit
order A → B → C → D. When [Input Configuration] [Multi View] is selected, SDI
4:2:2 ICtCp 10-bit
signals and HDMI signals can be displayed in different formats (except ICtCp/
4:2:2 ICtCp 12-bit
XYZ).
4:4:4 ICtCp 10-bit
• The settings for correctly displaying ICtCp format signals are as follows.
4:4:4 ICtCp 12-bit
- [Picture Mode]: [ITU-R BT.709] or [ITU-R BT.2020]
4:4:4 RGB 10-bit
- [Color Gamut]: [ITU-R BT.709] or [ITU-R BT.2020]
4:4:4 RGB 12-bit
- [Gamma/EOTF]: [SMPTE ST 2084 (PQ)] or [Hybrid Log-Gamma]
4:4:4 XYZ 10-bit
• If you need to use the ICtCp format for SDI signals, select any of the following to
match the signal: [4:2:2 ICtCp 10-bit], [4:2:2 ICtCp 12-bit], [4:4:4 ICtCp 10-bit],
4:4:4 XYZ 12-bit
[4:4:4 ICtCp 12-bit]
HDMI Signal / Multi
• To use 4:4:4 XYZ 10-bit for SDI signals, select [4:4:4 XYZ 10-bit]. Then, signals
View
will be processed as signals where XYZ data is included in RGB data output in
Automatic
4:4:4 RGB 10-bit format.
• With SDI signals, when [Color Gamut] is set to [Cinema Gamut to XXX] or
[S-GamutXXX], or when [Gamma/EOTF] is set to [Canon Log], [Canon Log 2] or
[Canon Log 3], operation changes as follows according to the color format.
-
-
[Select Input Signal] Sets the audio terminal.
When [Quad Input]
Automatic, Input A, [Automatic]: Sets automatically to match the input signal.
Input B, Input C, Input D
• For [Select Input Signal] [Automatic] or [Single Input], it is fixed at [Automatic].
When [Dual Input A,B]
• When [Input Configuration] [Multi View] is selected, the list of terminals set in
Automatic, Input A,
[Screen A to D] is displayed and can be set.
Input B
When [Dual Input C,D]
Automatic, Input C,
Input D
This function can be used by applying a paid license.
Configures various settings for Switch Out. The signal is output from the MULTI FUNC. OUT terminal.
Automatic [Automatic]: Automatically detects the terminals that have inputs or are
SDI Input A
SDI Input B [SDI Input A], [SDI Input B], [SDI Input C], [SDI Input D]: Outputs the SDI
SDI Input C
SDI Input D [Off]: No output.
Off
• When the [Select Output Signal] setting is changed, the output may be
temporarily disrupted or stopped.
White When [Image Division] is set to [Multi View (Quad)] or [Multi View (Dual)],
Red displays a frame in the selected color for the signal to be switched out.
Green
Off
Setting Options
ICtCp/RGB: Operates as YCbCr
XYZ: Operates as RGB
displayed, and outputs their signals.
Input A to D signals.