Table of Contents
Advertisement
Read this first!
WARNING:
Installation work should only be carried out by the certified personnel.
If this product is not installed correctly, serious accidents may result.
z
Follow the instructions specified in "Installation" and "Replacing projector mount bracket" of this manual, and
z
perform secure installation.
Install the wall mount bracket in accordance with the structure and materials of the installation
location.
If a mistake is made in the installation procedure, the wall mount bracket may fall down and an injury may
z
result.
Mounting and installation must be carried out by two or more persons.
When installing the projector in an overhead location, for example, in a high ceiling, at least two persons will
z
be required to handle the installation.
Make sure that your footing is safe and secure during installation.
If your footing is not secure, you may fall down or drop the unit, and an injury may result.
z
Do not loosen or remove the wall mount bracket screws or bolts unnecessarily.
The projector may fall down and an injury may result.
z
Do not install in a location that is not strong enough.
If the installation location is not strong enough, the unit may fall down and damage to the projector or an
z
injury may result.
Do not install the wall mount bracket in humid or dusty locations or in locations where the wall mount
bracket may come into contact with oily smoke or steam.
Using the projector under such conditions may result in fire or electric shock. Also, the oil will cause the
z
plastic to deteriorate and the projector may fall down when installed on a wall.
Do not allow children to reach the supplied screws and flat washer.
The supplied screws and metal fittings can cause personal injury if swallowed.
z
If swallowed, seek medical advice immediately.
z
Do not disassemble or modify the wall mount bracket.
The projector may be damaged or fall, causing injury.
z
CAUTION:
Only install a designated projector.
Only install using a designated method.
The projector may fall down and be damaged, and an injury may result.
z
Do not install the unit in a location that may impede projector ventilation.
A fire may result.
z
Do not hang from or hang objects on the projector or wall mount bracket.
The projector may fall and cause injury.
z
When installing, always use the supplied components.
The unit may be damaged, or the projector may fall down and an injury may result.
z
Install the mounting screws and power cable in such a way that they will not make contact with metal
objects inside the wall and ceiling.
Electric shocks may result from contact with any metal objects inside the wall and ceiling.
z
r Panasonic Connect Co., Ltd. takes no responsibility for any accident or damage caused by the
installation of the wall mount bracket using methods that are not described or methods that do not
use the parts specified in these Installation Instructions.
r If products are no longer being used, they should be dismantled and removed by certified personnel
as soon as possible.
Always follow these precautions
ENGLISH - 3
Advertisement
Table of Contents
