Time Server - Epson TM-P20II Reference Manual

10.6.4.4 Time Server

10.6.4.4.1 Models that Support Node.js
10.6.4.4.1.1 Top Page
10.6.4.4.1.1.1 Image
The following figure shows the layout of this settings area.
10.6.4.4.1.1.2 Setting Items
The following table shows the items on the page.
Items
"Use Time Server"
"Time Server Address"
"Update Interval (min)"
"Time Server Status"
10.6.4.4.1.1.3 Button
The following table shows the buttons on the page.
Items
"OK"
When the "OK" button is pressed, Web Config displays a pop-up window with the following message if it recognizes an error in
the entered value.
Items
"Invalid value below."
"-Time Server Address"
"-Update Interval(min)"
Figure 10-79 Time Server Settings
Table 10-205 Time Sever Settings
You can choose whether to use a time server.
"Use" / "Do Not Use"
Enter an NTP server address by IP address or FQDN.
Set the interval for updating the time on the printer.
Shows the latest connection status between the printer and
the server.
"Completed synchronizing" / "Synchronizing" / "Failed to
synchronize" / "Disable"
Table 10-206 Button
- Button at the bottom of the main frame for configuring settings.
Table 10-207 Error Pop-up
Shows a warning when a value is entered incorrectly.
Setting Items
Button
Description
Description
Description
Condition
-
Enabled if "Use" is
chosen in "Use Time
Server"
Enabled if "Use" is
chosen in "Use Time
Server"
Enabled if "Use" is
chosen in "Use Time
Server"
156