Change Administrator Password; Top Page - Epson TM-P20II Reference Manual

10.5.2 Change Administrator Password

In this area, the user can change the authentication information for an administrator.
The settings that are configured by the user in this area are used when an administrator logs on.

10.5.2.1 Top Page

10.5.2.1.1 Image
10.5.2.1.2 Setting Items
The following table shows the items on the page.
Items
"Current password"
"New Password"
"Enter between 1 and 20 characters."
"Confirm New Password"
"Note: It is recommended to communicate
via HTTPS for entering an administrator
password. "
Figure 10-61 Change Administrator Password
Table 10-154 Setting Items
Description
Text box for entering the current
password
Text box for entering the current user's
name.
Usable string: ASCII code (0x20-0x7E)
from 0 to 20 characters.
Message for entering characters.
Text box for entering a new password.
Usable string: ASCII code (0x20-0x7E)
Max of 20 characters.
However, if the password is against the
password policy, the setting will fail.
Message for entering characters.
Setting Items
Button
Condition
-
-
-
-
-
132