Encryption And Security Settings Page - Bosch B426 Installation And Operation Manual

22 en | Configuration
Figure 5.5: Panel Address Settings page
Use this option to select the bus address for the control panel type to which the module is
connected.
5.10

Encryption and Security Settings page

Figure 5.6: Encryption and Security Settings Page
Encryption Enable
Default: No
Selections: Yes, No
Yes: All communication through the network module is encrypted. AES encryption must also
be set at the central station receiver and the PC running RPS.
No: All communication through the network module is unencrypted.
Use this option to enable or disable Advanced Encryption Standard (AES) encryption on the
module.
Notice!
Do not enable encryption in the module for B Series control panels as encryption is done in
the panel settings.
2013.08 | 02 | F.01U.281.208 Installation and Operation Guide (UL)
Conettix Ethernet Communication
Module
Bosch Security Systems, Inc.