Bosch B426 Installation And Operation Manual page 19

Conettix Ethernet Communication
Module
If the module fails to obtain an address from the primary server, the alternate DNS server is
used, if specified. The alternate address has a dot decimal notation, which consists of the four
octets of the address expressed separately in decimal and separated by periods. Each octet
has a value 0-255. When this is defined through the DHCP service, leave the default value.
IPv6 Mode
Default: Disable
Selections: Enable, Disable
Enable: IPv6 enabled; module works with IPv6 addressing.
Disable: IPv6 disabled; module works with IPv4 addressing.
IP Version 6 (IPv6) is a new version of Internet Protocol. Select whether the module works
with IPv6 or IPv4 addressing.
Obtain IPv6 DNS Server Address Automatically
Default: No
Selection: Yes, No
In DHCP mode, the default value of 0:0:0:0:0:0:0:0 indicates that the DHCP server's default
DNS is used. To use a custom DNS server in DHCP mode, change the parameter to the
specified DNS server's IP address.
IPv6 DNS Server IP Address
Default: 0:0:0:0:0:0:0:0
Selection: 0:0:0:0:0:0:0:0 to FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
This parameter configures the IPv6 DNS server address in Static IP mode.
A DNS server converts internet domain names or hostnames to their corresponding IP
addresses. In DHCP mode, the default value indicates the DHCP server's default DNS is used.
To use a custom DNS server in DHCP mode, change the parameter to the specified DNS
server's IP address.
The IPv6 DNS address has a dot decimal notation, which consists of the eight octets of the
address expressed separately in decimal and separated by colons. Each octet has a value 0-
FFFF. When this is defined through the DHCP service, leave the default value.
For IPv6, only the DNS server addresses are entered as numbers. All other entries should be
limited to IPv6 addresses or DNS names.
Alternate IPv6 DNS Server IP Address
Default: 0:0:0:0:0:0:0:0
Selection: 0:0:0:0:0:0:0:0 to FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF
This parameter provides an alternate IPv6 DNS server IP address.
If the module fails to obtain an address from the primary server, the alternate IPv6 DNS server
is used, if specified. The alternate IPv6 DNS address has a dot decimal notation, which
consists of the eight octets of the address expressed separately in decimal and separated by
colons. Each octet has a value 0-255. When this is defined through the DHCP service, leave the
default value.
TCP/UDP Port Number
Bosch Security Systems, Inc. Installation and Operation Guide (UL)
Configuration | en 19
2013.08 | 02 | F.01U.281.208