Operation - Siemens SIMATIC MV320 Manual

5 Operation

Operation
5
Introduction
This chapter will show you how to use the functions of the application example
described above.
Procedure
To store data from the SIMATIC MV320 handheld reader in the CPU, enter the
corresponding data codes with the handheld reader.
1. Using the MV320 reader, scan one of the codes from
2. You can monitor the data on the "DataPtP" data block in STEP 7.
Sample codes
Here are some sample codes for testing the transmission. The contained string is
always below the Data Matrix code.
Figure 5-1
ABCDEFGHIJKL
Siemens AG
Note If you want to send individual data, you can use code generators found on the
internet.
Reading QR Codes with SIMATIC MV320 via ET200SP CM PtP
Article ID: 109474684, V2.0, 10/2021
Figure 5-1.
Hello World!
0123456789
18