Machine Lifting - Acer ATL 1840E Operation Manual

Please use the following equipment to lift the machine.
1) A crane which the safety loading weight required must more than the
machine at least.
2) Two safety straps with width of 80 mm, thickness of 6 mm and length of 4000
mm. the safety loading of required is as same as the crane.
3) Some Tools for lifting machine.
Wrap the straps under the ribs as shown in Figure and then lift the machine
in the slowest speed of crane.
NOTICE
1) Machine must be always kept balanced during lifting.
2) Place protection material on any part of the machine that might be touched
by straps.
3) Please apply for suitable Stacker lift & Spreader according to the strength of
the machine weight.

MACHINE LIFTING