FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
Figure 6-3 Installing the mounting plate of the rain and snow cover
Step 2 Lift the rain and snow cover and insert it into the U-shaped slot in the mounting
plate of the rain and snow cover from above the mounting plate.
Step 3 Insert a rubber pad between the bottom of the rain and snow cover and the
mounting plate. Install screws on both sides and three screws on the top of the
rain and snow cover to partially secure the rain and snow cover.
Issue 07 (2022-12-15)
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Installing External Accessories for Pre-fab. Modules
59