iSitePower-M (MAP05A1, MAB05B1)
User Manual
7.4 Installing PV Input Power Cables
Procedure
Step 1 Use a removal wrench to remove the waterproof gland from the PV input terminal
on the power module.
Step 2 Install the PV input power cables.
Figure 7-10 Installing the PV input power cables
----End
7.5 Installing Battery Module Power Cables
● Do not reversely connect positive and negative battery module power cables.
● Use the power cables delivered with the product. If the number of cables is
Procedure
Step 1 Use a wrench to remove the waterproof glands from the cascading terminals of
the battery modules.
Issue 02 (2021-12-30)
NO TE
Take out the removal wrench from the decorative cover delivered with the product.
CA UTION
insufficient or any cable is damaged, contact the dealer to obtain cables. Do
not prepare cables by yourself.
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 Electrical Connection
67