ABB i-bus KNX Product Manual page 165

ABB i-bus® KNX PARAMETERS
—
7.9.5.1.4
DEPENDENT PARAMETER
Position on disabling
This parameter can be used to define the blind/shutter reaction upon receipt of the value 1 on the group
object Disable . The blind/shutter is moved to the defined position and disabled in this position.
If the blind/shutter is disabled in its position, it cannot be operated via other group objects, manual
operation or the i-bus® Tool until disabling is canceled. Travel range limits are not taken into account
during disabling.
Higher-priority safety functions will continue to run.
Options
No reaction/deactivated
Up
Down
Stop
Unchanged (disable)
Scene assignment
Individual position
Condition for visibility:
Parameter window Safety/Weather \ Parameter Parameter setting \ Option Individual
—
7.9.5.1.4.1
DEPENDENT PARAMETER
Scene assignment
This parameter can be used to define which scene number is retrieved.
The scene assignment must be defined in Parameter window Scene assignments, in the parameter En-
able scene assignment x.
Options
1 ... 16
Condition for visibility:
Parameter window Safety/Weather \ Parameter Parameter setting \ Option Individual \ Parameter Posi-
tion on disabling \ Option Scene assignment
Note
The Shutter Actuator output pair is not disabled; the function Disable is deactivated.
The blind/shutter moves to the upper end position
The blind/shutter moves to the lower end position
If the blind/shutter is moving, it will be stopped. If the blind/shutter is at rest, its position will remain
unchanged.
If the blind/shutter is moving, it will continue until reaching the target position. If the blind/shutter is
at rest, its position will remain unchanged. The blind/shutter is then disabled in this position.
The scene assigned to the Shutter Actuator output pair is performed.
•
The required positions of the blind/shutter and slats (depending on operating mode) can be defined.
•
•
Note
Scene assignment
Position height (0 % = top; 100 % = bottom)
Position slat (0 % = open; 100 % = closed)
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 165