ABB i-bus KNX Product Manual page 158

ABB i-bus® KNX PARAMETERS
Parameter
• Parameter setting
• Output reacts to wind alarm x
• Position for rain alarm
• Position for frost alarm
• Position on disabling
• Forced operation (1 bit / 2 bit)
• Position on cancellation of weather alarm, disabling and forced operation
• Automatic sun protection on cancellation of weather alarms, disabling and forced operation
• Order of priority of weather alarm, disabling and forced operation
7.9.5.1 Parameter setting
This parameter can be used to define whether the settings for the parameter window are adopted from
the template or each parameter is set individually.
Options
Apply from template
Individual
• Position on wind alarm
• Scene assignment
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Scene assignment
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Scene assignment
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Scene assignment
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Forced operation active ON
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Forced operation active OFF
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
• Position height (0 % = top; 100 % = bottom)
• Position slat (0 % = open; 100 % = closed)
The parameterization is adopted from the template for each parameter.
Parameters can be set individually.
• Output reacts to wind alarm x
• Position for rain alarm
• Position for frost alarm
• Position on disabling
• Forced operation (1 bit / 2 bit)
• Position on cancellation of weather alarm, disabling and forced operation
• Automatic sun protection on cancellation of weather alarms, disabling and forced operation
• Order of priority of weather alarm, disabling and forced operation
Product manual | SAH/S x.x.7.1 | 2CDC505173D0211 Rev. A 158