Canon LX-P1300 User Manual page 86

Chapter 2 Printing
2
Adjust the cutting position.
1
2
3
4
80
1. Click the [Utility] tab.
2. Click [ Cutter Adjustment].
The [Cutter Adjustment] dialog box appears.
3. Adjust the cutting position.
Adjust the cutting position by moving the slide
bar.
The center of the slidebar is the default position
(0.0mm). The more you slide the slider to the
left (- (minus)), the more the cutting position
moves forward (Paper ejection side). The more
you slide the slider to the right (+ (plus)), the
more the cutting position moves backward
(Paper feed side).
The cutting position can be adjusted between
-10.0 mm and +10.0 mm in steps of 0.5 mm.
To restore the default setting of the cutting
position, click [Defaults].
4. Click [Send].
A confirmation message appears.