Table of Contents
Advertisement
INSTALLATION
General
IRRInet-M DC SAFETY SUMMARY
Installation of the IRRInet-M DC unit should be done only by authorized
and qualified service personnel in accordance with the US National
Electrical Code. Only UL Listed parts and components will be used for
installation. Use UL Listed devices having an environmental rating equal
to or better than the enclosure rating to close all unfilled openings.
The IRRInet-M should be installed by qualified and authorized technicians.
If the installation involves high-voltage connections, technicians must be
specifically qualified to handle high voltage.
This equipment was tested with cables 3 meters in length. If longer cables
and/or cabinets are used, the installer is responsible for making sure that
the installation complies with the requirements of the relevant standard.
When using an RS485 communication cable longer than 140 feet, the
customer must supply the appropriate wire protection (against lightning or
other massive power spikes).
The product is a radio accessory. The installer must make sure that the
radio connected to the system has all required approvals and that the
installation meets the requirements of the standard. This equipment is a
base station unit and complies with the FCC base station requirements.
The antenna must be installed outdoors.
The IRRInet-M DC unit can be mounted on the wall, either with screws or on a DIN rail.
17
Advertisement
Table of Contents
