Table of Contents
Advertisement
(6) Press the "OK" button.
(7) Check below, and then press the "OK" button.
The file system is set the NTFS.
The Allocation unit size is set the Default
"Perform a quick format" is not checked. (There is no
"Enable and folder compression" is not checked. (There is no
Set the volume label to a blank.(refer to following photo)
(8) Click the "OK" button.
The progress is displayed on D drive in disk management.
When progress reach the 100% , format is finished and drive status become "Active"
Click the
in disk management. the disk management is closed after clicking.
3 - 14
mark in check box)
mark in check box)
L1E-EA0229
Advertisement
Table of Contents
