Available Imaging Time (Normal Imaging/Long-Term Imaging) - Canon CXDI-40G COMPACT Service Manual

3 Available Imaging Time (Normal Imaging/Long-term
Imaging)
[Overview]
There are two available imaging times as follow:
1) Normal imaging (0 - 1000 msec)
2) Long-term imaging (1001 - 3000 msec)
The maximum imaging time is now 3 seconds for the CXDI-40G Compact sensor, which can be
set on the GUI.
[Precaution]
• The preview display becomes slower when using long-term imaging.
• The preview display may also become slower when performing normal imaging using the
part button that is set to long-term imaging (imaging time sett ings: 1001 msec to 3000 msec).
• Imaging preparation time: 10 seconds for normal imaging and 30 seconds for long-term
imaging. In imaging preparation time, the imaging unit changes from sleep status (sensor in
standby status) to ready status (possible to perform imaging).
(The imaging cycle time
*1
Time required preparing for the next imaging after a single imaging is done. Normal
imaging: 15 sec, long-term imaging: 30 sec.
[Technical Description]
1. The maximum value for imaging condition
• When using the CXDI-40G Compact sensor, the maximum value of the exposure time
is 3000 msec, which can be set on the screen.
• The maximum value of the tube current is 1600mA. The maximum value of the mAs
value is changed from the 3000 maximum value of the exposure time to 4800 mAs.
[Reference]
Up to CXDI V5.1
CXDI-11- CXDI-31, 60G sensor
Other sensors
3. Function
*1
becomes longer.)
Exposure time
1000msec
↓
1000msec
3000msec
- 8 -
Tube current mAs value
5000mA 5000mAs
↓
1600mA 1600mAs
1600mA 4800mAs
↓